HomeAbout UsProductsContact Us
Photo GalleryVideosBarrier Gate OperatorsManual Lift Barrier Gates
Manual Swing Barrier Gates Traffic SpikesAccess Control Speed Bumps
Vehicle Detection LoopsWhat's New?Blog

Traffic Spikes Secure Lane
Cobra EZ In Ground Traffic Spike
Call Christine for a price quote today
COBRA EZ Traffic Spikes
COBRA EZ Traffic Spikes
Finally!  An easy in ground traffic spike installation!  

EZ to install.  Saw Cut the asphalt or concrete roadway, remove the dirt, apply adhesive to the edges of the backside and place over excavated area!  That is it, your done!  

This is the perfect traffic spike unit for low ground clearance vehicles like Corvettes.  No more complaints about the traffic control spikes touching the car chassis or air dam. 

Please remember the 5 MPH Rule when crossing any traffic spike unit.  Use speed bumps if necessary to control vehicle speed.  Speedbumps  

Warning Signs should always be used.
COBRA EZ™ to Install Flush Mounted In Ground Directional Traffic Control Spike System
COBRA EZ Flush Mount Traffic Spike
COBRA EZ Flush Mount Traffic Spike
Cobra EZ In Ground Traffic Spike
COBRA EZ™ Flush Mounted | In Ground Directional One Way Traffic Control Spikes

Model 11320 – 3’ (914.4 mm) - 111 lbs, 50 kg

Model 11620 – 6’ (1828.8 mm) - 225 lbs, 102 kg
Traffic Spikes Warning Sign
Copyright © 2013 Secure Lane LLC, All Rights Reserved  
Contact the webmaster at: [email protected]
3618 S. Calexico Ave.  Tucson, AZ 85730 USA

  • No Concrete Required
  • Road Surface & Top Plate Supports the Traffic Spike Unit
  • Excavated area underneath provides the drainage space
  • Stainless Steel Heater Cable available for this unit , great for areas that get snow and icy weather. 

Call for your special NEW PRODUCT Sale Price Today!

Available In:
  • Standard Duty 1/4" Thick Steel 
  • Heavy Duty Axle Load Model 3/8" Thick Steel 
  • Painted
  • Galvanized
  • Powder Coated
3 Simple Steps!  No Concrete Required.  Finally an IN GROUND FLUSH MOUNTED TRAFFIC CONTROL SPIKE that provides that smooth and easy passage for low profile vehicles without the expense of all the materials and labor that is required with traditional flush mount spike systems.
Saw Cut & Remove Dirt.
Apply a construction grade adhesive such as Liquid Nail to backside edges of the traffic spike section.
Place traffic spike section over area and allow adhesive to dry.  That's it!  Your lane is open!