Loop Sealant is back!!! Loop Goop with Flat Applicator Tip : SECURE LANE BUZZ BLOG

HomeAbout UsProductsContact Us
Photo GalleryVideosBarrier Gate OperatorsManual Lift Barrier Gates
Manual Swing Barrier Gates Traffic SpikesAccess Control Speed Bumps
Vehicle Detection LoopsWhat's New?Blog

Traffic Spikes Secure Lane
Secure Lane Blog 
Be sure to check out our BLOG every chance you get.  Weekly posts on new products, installation tips and just some interesting industry stuff!  

Loop Sealant is back!!! Loop Goop with Flat Applicator Tip

by Christine Richards on 02/19/15

Polyurethane Saw-Cut Loop Sealant with Flat 3/16" Sealant Tip
Available in BLACK and GREY
30 fl oz Tubes
12 Tubes per Case


Coverage Per Tube/Case

3/16" Wide Saw-Cut (Best Size)
Depth
Length per Tube
Length per Case
1 1/4"
20ft
240ft
1 1/2"
16ft
192ft

1/4" Wide Saw-Cut (25% Larger)
Depth
Length per Tube
Length per Case
1 1/4"
15ft
180ft
1 1/2"
12ft
144ft

Using a 3/16" wide blade over 1/4" blades will save you 25% in loop sealant.

To get the most out of your tube of Loop Goop use with a 3/16" wide saw blade, and BD Loops 3/16" Preformed Saw-Cut Loops.


Use a BD Loop Preformed Saw-Cut Loop and save up to 55 minutes in installation time per loop:

Saw Cut Loop

15 min Preformed Loop - no wrapping wires in the field.
10 min Loop and lead-in fit in same size groove - No double cutting!
10 min No need to twist lead-in wires.
5 min No need to install backer-rod.
15 min Seal Loop in one pass from the bottom up with included 3/16" flat sealant tip! Pointed tips seal the groove from the top down and require 2-3 passes to fully seal the groove.


Comments (0)


Leave a comment


www.barriergatearm.com
Click on a product to see more!